Home - Article Writing - Web Content - Press Release - Jobs - Directory - Search:

The way to Care and Preserve Your Cake decorating Airbrush

By: Robert Kaneff

The air brush is a wonderful device for decorating cakes. It is finely constructed and sensitive. It requires appropriate care. Here are three significant rules:
1. Use quality liquid colors, free of grit and lumps.
2. At all times leave the airbrush flushed clean & run until empty.
3. Prevent damage to your delicate needle & nozzle.
Using Your Airbrush With simply a bit of preparation, you can be taught the basic abilities of air brush art. Practice on paper towels in anticipation of you acquire the hang of it. Then attempt it on real cakes.
1. It is best to purchase an airbrush & compressor with a pressure gauge/bleed valve. If you are using regular Lucks Liquid airbrush Colors set air pressure to 20 psi. When you are using Lucks Shimmer air brush Colors turn up your air force to 30 psi or higher. The greater the pressure, the finer your spray. The lower your pressure, the coarser the spray. Some Cake Decorators favor an even higher setting of 20 psi. For close by work on soft icings, you may have to lower the pressure to keep from blowing holes in the icing.
If you have Lucks new airbrush (purchased in 2010 or later than), the trigger is slightly dissimilar than other airbrushes you may have utilized in the past. For finest spraying, push your trigger downward, & after that gradually pull your trigger back. Do not flip or snap the trigger repeatedly. Always push the trigger downward, next draw it back. As soon as you happen to be finished spraying continue to grasp the trigger downward as you gently release it forward.
2. Put liquid color in the air brush cup (not more than half filled otherwise it might spill on your cake).
3. Grasp the air brush like a pencil. To spray color, gradually draw your button back with your index finger. The farther reverse you pull the more color will come out.
4. Perform spraying a large area, from roughly speaking 10 ins above your work table. Pull the button just a bit & move your hand in circles then back & forth. Rest & utilize simple, smooth actions. Perform until you can get a light, smooth shading of color. Then move closer, about 5 inches, and perform the same thing.
5. Now, shift closer yet, roughly one or 2 ins, and attempt to inscribe your first name. This takes a bit more ability, but arrives with practice.
6. With a little practice, you can change colors in a few seconds. Empty the cup upside down & flush with water. Replenish with new color. Test spray to ensure that all of the old color was flushed out, before spraying on the cake. Certain colors will not require flushing, as an example, switching from lighter toward darker or yellow to green or pink to red.

Article Source: http://www.articlecontentprovider.com/articlesubmit

The air brush is a magnificent device for designing cakes. It is finely made and delicate. It requires proper care. Here are three important rules:

I hope that this commentary has helped in your comprehension of the care and use of a cake decorating airbrush. For additional information on cake decorating please visit our website. http://www.oasisupply.com

Freelance Jobs

Please Rate this Article

Click the XML Icon Above to Receive Articles Via RSS!









Need Articles or Content written for you?
Article Directory Toplist