The only reason that makes it necessary that once in a while a bay window has to be replaced is the fact that it is more exposed to elements of weather. A bay window does not have a roof on it to reduce the effects of rain and hot sunshine. Therefore, it easily absorbs rainwater and sunshine which are detrimental to the lifetime of the bay window. Some have tried to reduce the need to replace bay widows by installing those made from vinyl as opposed to those made from wood. • Tools and materials The task of replacing a bay window may look daunting to some persons but it need not be. One simply needs to have the right set of tools and he is set for the project. Most of the tools needed are commonly found in any household. They include a hammer, a utility knife, a pry bar and a drill. Others can be obtained from the local hardware dealer such as nails, screws, and caulk. Of course, you will also need the new bay window kit. • Remove the existing window Once you have assembled all the tools and materials, the first step is to use the utility knife and scrape off all the caulk that surrounds the present window. Then remove the window trim by prying with the pry bar. It might be necessary to get an extra pair of hands to help you hold the window as you pry it off with its frame. Use the drill to unscrew any screws that held the old window in place and the hammer to take out the nails. • Install support braces Take out the new bay window and start installing it from the bottom frame. Secure the window’s braces for support. We didn’t talk of tape measure in the tools section but you now need it to work out the window’s size. This will help you determine the number of braces to be used. In general, two braces are recommended for windows up to a maximum of four feet wide. • Install the window Lift the new window into position and hold it there, ensuring that it goes exactly into the position of the former one. Use the drill to fasten the screws on all sides of the frame on the supporting braces. • Caulk and secure Prepare the caulk and put it all round the window on the outer sides. Silicone caulk is preferred over al other types because it provides insulation and protection from rainwater. Apply trim on the interior of the bay window to secure it in place.
Article Source: http://www.articlecontentprovider.com/articlesubmit
The only reason that makes it necessary that once in a while a bay window has to be replaced is the fact that it is more exposed to elements of weather. A bay window does not have a roof on it to reduce the effects of rain and hot sunshine.
Read more details about replace bay window and bay windows quotes.
Please Rate this Article
5 out of 5 4 out of 5 3 out of 5 2 out of 5 1 out of 5
