The wheels and tires of a car have a great significance in terms of giving a look to it. Besides helping to roll the vehicle on the streets, a new set of wheels can give an old car a total facelift and enhance safety of the rides. If you are planning to buy new wheels and tires for your car, you have to decide on certain factors. You can go for new set of wheels with the same diameter and width of your old ones. You can also go for bigger wheels. This will increase the car’s area of contact with wheels. This will also enable better acceleration and grip during turns; you will experience a better stopping power. Another option is going for taller rims. They will give your car a striking look and draw the attention of people you drive by. You will get a powerful feel while driving. If you are anxious about fitting taller tires than don’t do it. These tires have the same diameter as the ones fitted with your car, when you bought it. The brownie point in using such tires is that you do not need to recalibrate your speedometer which you usually do when you change the diameter of the tire. The process of recalibration is an excruciating job. With these tires you can drive your car immediately after tire replacement. However it is not important to change wheels and tires only. To get a high performance from your vehicle you should keep the wheels clean. Going for car wash is a good idea but it will not be for free. You can clean your car right at your home. First and foremost figure out the elements that is causing problems in your wheels and tires. The dust particles that affect the performance of you wheels are tars, mud, and different soil crumbs. Acid rain and winter salt are potential sources to make the wheels brittle. The first step to effective wheel cleaning is selecting a branded cleaner. You will come across a host of cleaning agents in the market, but you should go for one which will clean safely. Avoid solutions with high acid content that can damage your wheels. There are several products available in the market like brushes and applicators to make your job easy. However, the most commonly used cleaning against for cleaning wheels and tires is detergent. Brake dust is a major cause for worsening of the performance your tires. The brake pads are made of monofilament carbon fibers, metal filings, Kevlar fibers and polymer based adhesives. When the adhesive residue of the break pad becomes wet, it turns acidic and affects wheels. A good remedy to this is using a coat of wax that acts as a sacrificial protectant. The damaging effects of acidic brake pad adhesive are unleashed upon the wax and not your wheel. While cleaning your wheels gently spray the cleaner on all areas. Leave it for 3-5 minutes to let the cleaner work. Then scrub the wheel with a soft cloth/sponge/mitt. In some areas you should brush very gently to remove the dirt. Certain areas might need re-spraying to dislodge the dirt.
Article Source: http://www.articlecontentprovider.com/articlesubmit
The wheels and tires of a car have a great significance in terms of giving a look to it. Besides helping to roll the vehicle on the streets, a new set of wheels can give an old car a total facelift and enhance safety of the rides.
Troy Bacon is author of this article on Wheels. Find more information about Aftermarket Rims here.
Please Rate this Article
5 out of 5 4 out of 5 3 out of 5 2 out of 5 1 out of 5
